Products
-
Copper plated steel wire wheel brush (steel wire brush)
Size: customized drawing.
Material: 0.3 copper plated steel wire.
product purpose: for deburring after machining, removing cork protruding wood reinforcement after wood processing, removing stains during enamelled wire welding and thread end paint.
Optional brush wires: nylon wire, abrasive wire, metal wire, sisal, natural plant wire.
Scope of application: mainly installed in grinder, angle grinder Remove hair and thorns with pneumatic tools.
-
High performance cutting disc
WARRIOR
Extra – thin disc
FEATURESL:
High speed cutting
Lower heat output
Incomparable durability
Less wastage of raw material
Easily control and comfortable cut
Excellent sharpness and availability
Reduce the consumer of the energy
Excel in grain retention and fray resistance
Size(mm)Dia x Depth x Hole: 115×1.0 / 1.2 / 1.6×22.23, 125×1.0 / 1.2 / 1.6×22.23, 180×1.6×22.23, 230×1.8×22.23
-
Type 41 Fibreglass Reinforced Flat Cut-off Wheel
Art no.200.00
Operation symbol
The products of this series are suitable for cutting and fluting stainless steel rubes, steel plates, walled tubes.
Key points for best results.
Hold your right angle grinder at 90°for cutting or fluting.
Run the cut-off wheel according to the highest possible speed marked on the wheel.
-
Type 42 Fibreglass Reinforced Depressed Center Cutting Wheels
Art no.201.00
The products of this series are suitable for grinding welding points, welding line and grinding surface of common metals, stainless steels, non-metals, non-ferrous metals, etc.
Key points for best results.
Hold your right angle grinder at 90°with notcher.
Run the gringer according to the highest possible speed marked on the wheel.
Higher power and speed of the grinder, higher efficiency.
-
Diamond series products
Diamond saw blade is a cutting tool, which is widely used in the processing of hard and brittle materials such as concrete, refractory, stone, ceramics and so on. Diamond saw blade is mainly composed of two parts; Matrix and cutter head. The matrix is the main supporting part of the bonded cutter head.
The cutter head is the part that cuts in the process of use. The cutter head will be continuously consumed in use, while the matrix will not. The reason why the cutter head can cut is because it contains diamond. Diamond, as the hardest material, rubs and cuts the processed object in the cutter head. The diamond particles are wrapped in the cutter head by metal.
-
Flint/Aluminium oxide/Black silicon carbide
Coarse (60)
Best for extreme material. Removal & removing old paint.
Medium (80-180)
Best for sanding old paint, shaping body, filler & primer.
Finishing (220-600)
Best for primers, sealers & final sanding before paint.
Feathering (800-3000)
Best for final sanding after paint & top coats before buffing.
-
Aluminium oxide/Black silicon carbide/Zriconia oxide
Emery cloth is also called iron emery cloth and steel emery cloth. Abrasive cloth is made by uniformly bonding abrasive (sand particles) to solid cloth base plate with binder. It is mainly used to polish rust, paint or burr on the surface of metal workpiece and polished surface. It can also be used to polish non-metallic materials such as bone products.
-
Aluminium oxide/Black silicon carbide
Sand sponge is a foam sponge, impregnated with various sizes of sand. People can use sponge as a sand grinding tool to smooth various surfaces. Many hardware and craft shops carry sand sponges and accessories, such as brackets, for ease of use. They can be useful tools at home or in the workshop.
-
Lambs wool / Polishing felt
Diam
115mm(4½”)
125mm(5″)
180mm(7″)
230mm(9″) -
Sander / polisher accessories kit
1 pc Polishing sponge
1 pc Synthetic with rubber backing pad
1 pc Rubber backing pad
1 pc Synthetic bonnet
1 pc Wool bonnet
3 pcs Velcro discs -
Rubber backing pad
Diam Thread Size
100mm(4″) M10x1.25; M10x1.5; M14x2
115mm(4½”) M10x1.25; M10x1.5; M14x2; 5/8″-11NC
125mm(5″) M14x2; 5/8″-11NC
150mm(6″) M14x2; 5/8″-11NC; M16x2
180mm(7″) M14x2; 5/8″-11NC; M16x2 -
Plastic pad
Diam Thread Size
80mm(3″) 3/8″ x 24; M10x1.25; M10x1.5; M14x2
100mm(4″) 3/8″ x 24; M10x1.25; M10x1.5; M14x2
115mm(4½”) M10x1.25; M14x2; 5/8″-11NC
125mm(5″) M14x2; 5/8″-11NC
150mm(6″) M14x2; 5/8″-11NC; M16x2
180mm(7″) M14x2; 5/8″-11NC; M16x2